Wropo logo
Bandila ng Vietnam Vietnam
Mag-post ng isang ad
  1. Home
  2. Negosyo
  3. Mga Produkto at Imbentaryo
Mangyaring magkaroon ng kamalayan na ang Wropo ay nagpapatakbo bilang isang classified platform ng ADS at hindi pinatunayan ang mga advertiser o ang kanilang mga listahan. Tingnan pa

Wala kaming direktang kaalaman sa aming mga gumagamit, o hindi natin kontrolin ang kanilang mga aktibidad. Iwasan ang pagpapadala ng pera nang maaga sa mga taong hindi mo kilala. Laging mag-ingat sa mga online na transaksyon at i-verify ang impormasyon bago magpatuloy. Mas kaunti ang tingnan

SPD-V200 Strand Condition Monitor CCM Condition Monitoring

Floria Liang Mga Produkto at Imbentaryo, Hanoi, IMG-0
Pagsasalin: Bandila TL Orihinal

Overview
In order to ensure the quality of the slab, it is necessary to strictly control the performance and various parameters of the CCMs guide roll within a certain error range. Due to the continuous casting machine (CCM) is large and in a harsh production environment, it is difficult to measure the performance of the continuous casting machine manually, and many parameters are difficult to measure. Therefore, it is very important to have a set of equipment that can simulate drawing of steel billet to realize the measurement of CCMs various parameters and performance. The multifunctional strand condition monitor uses various sensors to realize the measurement of CCMs roll gap value, the arc value of continuous casting section, the rotation quality of the rolls, and the water spray pressure under the condition of simulating drawing of steel billet. Therefore, the CCMs quality can be controlled in real time, and it is convenient for the maintenance personnel to analyze the CCMs measurement results. The problem areas of the casting machine equipment can also be found. If these problems doesnt be found in time, it will cause the bad quality of CCMs products, the steel breakout in pouring process, surface and internal cracks and centerline deviation.

The measurement of the strand condition monitor

Roll gap value
By measuring the distance between a series of inner arc guide rolls and outer arc guide rolls on the CCMs roller bed.
It can be used to set the correct roll gap spacing for each pair of guide rolls in the slab caster.

Arc condition of guide roller
Measuring the position between the position of the CCMs outer arc guide roll and the two adjacent guide rolls and then measuring the deviation compared with the origical position of CCMs guide roll, we can obtain the arc condition of the outer arc guided roller.

Guided roller rotation
It is possible to know whether each guided roller can rotate freely by measuring.

Water spray pressure
The operation of the water spray cooling system can be judged by measuring the situation of secondary cooling water spray at different positions of CCM's width direction. Then we can accurately locate whether the water spray at a certain point is normal.

The main components of the strand condition monitor
1. The main body of the strand condition monitor used to measure the continuous casting sector
2. The connecting chain between strand condition monitor and dummy bar
3. The storage rack chain of strand condition monitor
4. Battery charger: 24V 5A
5. Calibration equipment
6. Remote control
7. Laptop
8. Printer
9. Data communication cable

The technical parameter
1. The measurement range of roll gap: 210mm, 230mm (can be customized according to requirements)
2. The measurement accuracy of roll gap: 0.01mm
3. The arc measurement range: 80
4. The arc measurement accuracy: 0.01
5. The spray measurement range: 0-10
6. The spray measurement accuracy: 1
7. The battery usage times: 3 times

Presyo: ₫0
Whatsapp: Hindi
Kategorya: Mga Produkto at Imbentaryo
I-type: Pribadong indibidwal
Lungsod: Hanoi
Rehiyon: Hanoi
Sanggunian: VN-675159E332
Huling pag-update: 10 buwan ang nakalipas
Pagbisita: 165
Floria Liang Avatar Bg

Floria Liang

Nakarehistro sa Enero 10, 2024
Marami pang mga ad
SPD-V010 Handheld Roll Gap Checker for continuous caster

3

SPD-V010 Handheld Roll Gap Checker for continuous caster

₫0

Hanoi

Negosyo » Mga Produkto at Imbentaryo

Pribadong indibidwal

10 buwan ang nakalipas

MLC-V235 Continuous Casting Mold Level Control System

4

MLC-V235 Continuous Casting Mold Level Control System

₫0

Hanoi

Negosyo » Mga Produkto at Imbentaryo

Pribadong indibidwal

10 buwan ang nakalipas

LGK-S107 Analog Heat Source Instrument for Thermocouple

2

LGK-S107 Analog Heat Source Instrument for Thermocouple

₫0

Hanoi

Negosyo » Mga Produkto at Imbentaryo

Pribadong indibidwal

10 buwan ang nakalipas

LDT-N200 Ladle Comprehensive Management System

1

LDT-N200 Ladle Comprehensive Management System

₫0

Hanoi

Negosyo » Mga Produkto at Imbentaryo

Pribadong indibidwal

10 buwan ang nakalipas

IndustriaI Cable Harness Mold Level Control Cable

5

IndustriaI Cable Harness Mold Level Control Cable

₫0

Hanoi

Negosyo » Mga Produkto at Imbentaryo

Pribadong indibidwal

10 buwan ang nakalipas

MTD-A100 Mold Powder Thickness Detection System

1

MTD-A100 Mold Powder Thickness Detection System

₫0

Hanoi

Negosyo » Mga Produkto at Imbentaryo

Pribadong indibidwal

10 buwan ang nakalipas


Wropo logo
  • Mga lungsod
  • Mga rehiyon
  • Mga bansa
  • Patakaran sa Pagkapribado
  • Mga Tuntunin at Kundisyon
  • F.A.Q.
  • Pagpepresyo
  • Makipag-ugnay

Ang Wropo ay nagpapatakbo bilang isang classified platform ng ADS. Hindi kami nagmamay-ari, namamahala, o ginagarantiyahan ang anumang mga produkto o serbisyo na nakalista ng mga advertiser ng third-party.

© 2025 Wropo. Nakalaan ang lahat ng mga karapatan.

Pumili ng isang kategorya