Wropo logo
Zastava Vietnam Vietnam
Objavi oglas
  1. Doma
  2. Posel
  3. Izdelki in Zaloge
Upoštevajte, da Wropo deluje kot platforma za razvrščene oglase in ne preverja oglaševalcev ali njihovih seznamov. Pogled več

Nimamo neposrednega znanja o svojih uporabnikih, niti ne nadzorujemo njihovih dejavnosti. Izogibajte se pošiljanju denarja vnaprej ljudem, ki jih ne poznate. Vedno bodite previdni pri spletnih transakcijah in pred nadaljevanjem preverite informacije. Pogled manj

SPD-V200 Strand Condition Monitor CCM Condition Monitoring

Floria Liang Izdelki in Zaloge, Hanoi, IMG-0
Prevod: Zastava SL Izvirno

Overview
In order to ensure the quality of the slab, it is necessary to strictly control the performance and various parameters of the CCMs guide roll within a certain error range. Due to the continuous casting machine (CCM) is large and in a harsh production environment, it is difficult to measure the performance of the continuous casting machine manually, and many parameters are difficult to measure. Therefore, it is very important to have a set of equipment that can simulate drawing of steel billet to realize the measurement of CCMs various parameters and performance. The multifunctional strand condition monitor uses various sensors to realize the measurement of CCMs roll gap value, the arc value of continuous casting section, the rotation quality of the rolls, and the water spray pressure under the condition of simulating drawing of steel billet. Therefore, the CCMs quality can be controlled in real time, and it is convenient for the maintenance personnel to analyze the CCMs measurement results. The problem areas of the casting machine equipment can also be found. If these problems doesnt be found in time, it will cause the bad quality of CCMs products, the steel breakout in pouring process, surface and internal cracks and centerline deviation.

The measurement of the strand condition monitor

Roll gap value
By measuring the distance between a series of inner arc guide rolls and outer arc guide rolls on the CCMs roller bed.
It can be used to set the correct roll gap spacing for each pair of guide rolls in the slab caster.

Arc condition of guide roller
Measuring the position between the position of the CCMs outer arc guide roll and the two adjacent guide rolls and then measuring the deviation compared with the origical position of CCMs guide roll, we can obtain the arc condition of the outer arc guided roller.

Guided roller rotation
It is possible to know whether each guided roller can rotate freely by measuring.

Water spray pressure
The operation of the water spray cooling system can be judged by measuring the situation of secondary cooling water spray at different positions of CCM's width direction. Then we can accurately locate whether the water spray at a certain point is normal.

The main components of the strand condition monitor
1. The main body of the strand condition monitor used to measure the continuous casting sector
2. The connecting chain between strand condition monitor and dummy bar
3. The storage rack chain of strand condition monitor
4. Battery charger: 24V 5A
5. Calibration equipment
6. Remote control
7. Laptop
8. Printer
9. Data communication cable

The technical parameter
1. The measurement range of roll gap: 210mm, 230mm (can be customized according to requirements)
2. The measurement accuracy of roll gap: 0.01mm
3. The arc measurement range: 80
4. The arc measurement accuracy: 0.01
5. The spray measurement range: 0-10
6. The spray measurement accuracy: 1
7. The battery usage times: 3 times

Cena: ₫0
Whatsapp: Ne
Kategorija: Izdelki in Zaloge
Tip: Zasebna oseba
Mesto: Hanoi
Regija: Hanoi
Sklic: VN-675159E332
Zadnja posodobitev: Pred 10 meseci
Obisk: 165
Floria Liang Avatar Bg

Floria Liang

Registrirano naprej 10. januar 2024
Več oglasov
SPD-V010 Handheld Roll Gap Checker for continuous caster

3

SPD-V010 Handheld Roll Gap Checker for continuous caster

₫0

Hanoi

Posel » Izdelki in Zaloge

Zasebna oseba

Pred 10 meseci

MLC-V235 Continuous Casting Mold Level Control System

4

MLC-V235 Continuous Casting Mold Level Control System

₫0

Hanoi

Posel » Izdelki in Zaloge

Zasebna oseba

Pred 10 meseci

LGK-S107 Analog Heat Source Instrument for Thermocouple

2

LGK-S107 Analog Heat Source Instrument for Thermocouple

₫0

Hanoi

Posel » Izdelki in Zaloge

Zasebna oseba

Pred 10 meseci

LDT-N200 Ladle Comprehensive Management System

1

LDT-N200 Ladle Comprehensive Management System

₫0

Hanoi

Posel » Izdelki in Zaloge

Zasebna oseba

Pred 10 meseci

IndustriaI Cable Harness Mold Level Control Cable

5

IndustriaI Cable Harness Mold Level Control Cable

₫0

Hanoi

Posel » Izdelki in Zaloge

Zasebna oseba

Pred 10 meseci

MTD-A100 Mold Powder Thickness Detection System

1

MTD-A100 Mold Powder Thickness Detection System

₫0

Hanoi

Posel » Izdelki in Zaloge

Zasebna oseba

Pred 10 meseci


Wropo logo
  • Mesta
  • Regije
  • Države
  • Politika zasebnosti
  • Pogoji
  • F.A.Q.
  • Cene
  • Stik

Wropo deluje kot platforma za razvrščene oglase. Ne upravljamo, ne upravljamo ali jamčimo za izdelke ali storitve, ki jih navajajo tretji oglaševalci.

© 2025 Wropo. Vse pravice pridržane.

Izberite kategorijo