Wropo logo
Zastava Vijetnam Vijetnam
Objavite oglas
  1. Dom
  2. Posao
  3. Proizvodi i Zalihe
Imajte na umu da Wropo djeluje kao klasificirana platforma ADS i ne provjerava oglašivače ili njihove popise. Pogledajte više

Nemamo izravno znanje o našim korisnicima, niti kontroliramo njihove aktivnosti. Izbjegavajte slanje novca unaprijed ljudima koje ne poznajete. Uvijek budite oprezni u internetskim transakcijama i provjerite informacije prije nego što nastavite. Pogled na manje

MTD-A100 Mold Powder Thickness Detection System

Floria Liang Proizvodi i Zalihe, Hanoi, IMG-0
Prijevod: Zastava HR Izvornik

Overview
Mold powder is mainly used in the continuous casting and steelmaking process, evenly sprinkled on the molten steel surface in the mold to lubricate, keep warm, prevent oxidation and absorb non-metallic inclusions. Mold powder is an indispensable auxiliary production material in the production process. In the process of evenly distributing the mold powder to the molten steel surface of the mold, the amount of mold powder should be controlled, and the thickness of the mold powder should be within a certain range. If the coverage thickness of the mold flux is too thin, it will cause no heat preservation, oxidation of molten steel, inclusions, cracks, large drawing resistance, steel leakage, etc. At the same time, the coverage thickness of mold flux should not be too thick, they cant melt in time with too much mold powder, if the molten steel is churning, it is easy to get the mold powder into molten steel at this time, resulting in mold leakage. Therefore, the amount of mold powder must be controlled within a reasonable range. The detection and control of mold flux thickness is very important, especially for the steel plants which are strict with the steelmaking production process.

The detection principle
The mold flux detection system developed by Wuhan CenterRise M&C Engineering CO., Ltd. uses the laser triangular sensor fixedly installed above the mold to obtain the height h1 by scanning the upper surface layer of mold flux with high-precision laser triangulation. When the laser measuring head is placed each time, the height h3 of the upper nozzle of the mold will be marked, and the system through the PLC system which is connected to the continuous casting machine through the network to introduce the height h1 of the mold liquid level. Through the calculation of three heights, we can get the thickness of mold powder H = 900-h1-(h3-h2)mm (900mm is the depth of mold).

The features
The system adopts a high-precision laser triangulation distance meter, which can measure the thickness of the mold flux with high speed and high precision, and the accuracy can reach 1mm.
The equipment is easy to install and use. When we are using, the laser rangefinding sensor can be placed directly above the mold without affecting production.
The system can be interlocked with the automatic mold powder feeding system to automatically adjust the amount of mold powder, so as to automatically control the amount of mold powder within a reasonable range and realize intelligent automatic mold powder feeding.
Non-contact measurement, the system only needs ventilation protection, simple and stable to use.

The parameters
Measurement range0-50mm
Temperature measurement range: -20-700
Equipment installation distance

Cijena: ₫0
Whatsapp: Ne
Kategorija: Proizvodi i Zalihe
Tip: Privatna osoba
Grad: Hanoi
Regija: Hanoi
Referenca: VN-751566B2F9
Posljednje ažuriranje: Prije 9 mjeseci
Posjeti: 183
Floria Liang Avatar Bg

Floria Liang

Registriran na 10. siječnja 2024.
Više oglasa
LDT-L200 Ladle Lining Laser Thickness Scanner

2

LDT-L200 Ladle Lining Laser Thickness Scanner

₫0

Hanoi

Posao » Proizvodi i Zalihe

Privatna osoba

Prije 9 mjeseci

WGS-L030 Laser Velocimetry and Length Measuring Instrument

1

WGS-L030 Laser Velocimetry and Length Measuring Instrument

₫0

Hanoi

Posao » Proizvodi i Zalihe

Privatna osoba

Prije 9 mjeseci

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product CCD

1

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product CCD

₫0

Hanoi

Posao » Proizvodi i Zalihe

Privatna osoba

Prije 9 mjeseci

IndustriaI Cable Harness Mold Level Control Cable

5

IndustriaI Cable Harness Mold Level Control Cable

₫0

Hanoi

Posao » Proizvodi i Zalihe

Privatna osoba

Prije 9 mjeseci

ZST-P100 Online Continuous Temperature Measurement of the Billet End

1

ZST-P100 Online Continuous Temperature Measurement of the Billet End

₫0

Hanoi

Posao » Proizvodi i Zalihe

Privatna osoba

Prije 9 mjeseci

LDC-X200 Laser Wire Rod Diameter Measuring System

4

LDC-X200 Laser Wire Rod Diameter Measuring System

₫0

Hanoi

Posao » Proizvodi i Zalihe

Privatna osoba

Prije 9 mjeseci


Wropo logo
  • Gradovi
  • Regija
  • Zemalja
  • Pravila o privatnosti
  • Uvjeti i odredbe
  • F.A.Q.
  • Cijene
  • Kontakt

Wropo djeluje kao klasificirana platforma ADS. Ne posjedujemo, upravljamo ili jamčimo bilo koje proizvode ili usluge koje su nabrojali treći oglašivači.

© 2025 Wropo. Sva prava pridržana.

Odaberite kategoriju